|
|
 |
 |
|
|
 |
K-300 Rotomat KT
Unique from regular scanners, the Rotomat KT rotates continuously in one direction. By eliminating the time required to change directions every 360 degrees, a quick rotation time of only 36 seconds is possible on our standard size scanners.
|
|
 |
KNC-400 Non-contact Thickness Gauge
Non-contact thickness sensor for measuring highly sensitive film without any scratches, based on the capacitive measurement principle with high measuring solution and precision, with radial adjustment for sensor. For measurement at the bubble, for lines with stationary or rotating dies. Existing thickness measuring units K-100 or K-300 can easily be converted to the non-contact thickness gauge KNC-400.
|
|
 |
S-100 Barrier Gauge
The thickness measuring system S-100 is based on the capacitive measurement principle. It measures not only the thickness, but also the layflat and webposition. Two sensors follow continuously the edges of the film. The profile refresh depends on the rotation time of the collapsing frame or die, 2 profiles per rotation can be measured. The communication to a foreign control system is done by the well-proofed PCD-LINK Protocol.
|
|
 |
GBS-103W
This nuclear sensor is capable to measure any type of film. The air pressure coming out of the head prevents the film from touching the sensor.
|
|
 |
K-300 CF Gauge
The K-300 CF Gauge is a simple and cost effective solution to upgrade existing lines. The compact device, which is mounted into the collapsing frame, has a built-in RS-485 port for connection to the PC with the PROFILSTAR.NET or other visualization software. A wireless communication module is optional available.
|
|
 |
S-50
This thickness gauge is the perfect solution for blown film lines without automatic profile control system. The die can be manually adjusted according to the measured and displayed profiles. The result is not only quality improvement, but also remarkable savings of raw material. The measuring bar can be easily installed at any position between the nip and the winder. Thanks to its compact design, there is enough room in every existing line.
|
|
| Renovation of existing systems
To complete our range of products, we have available additional equipment and accessories to maximise your production output. |
||
Ultrasonic Bubble Detector Non-contact ultrasonic sensor to adjust the distance between the Kündig K-100 thickness sensors and the bubble. It eliminates the friction caused by the adjustment flap.
|
||
 |
Kindly provide us the Serial Number of your old Kündig system
We will be pleased to provide you with the most cost-effective solution update to the |
|
|
|
|||
 |
|||